Toyota Tundra Highlift Project
Page 2: Installing the MFC
I've documented installation of the MFC-02 before,
so here I'll just show a picture of the completed install. The
speaker is between the frame rails in the back with the vibration motor
immediately to the left, followed by the control unit itself. In
this picture only the lights which are part of the chassis are
shown. The rest of the lights are installed in the body.
Note that the MFC does not come with enough lights to install the bumper
lights and the four front fog lights and the five roof lights and the
four roll bar lights. I added the roll bar lights which I
purchased separately. With the high beams and the turn signals,
there are 21 forward facing lights and 6 tail lights.
©2019 Eric Albrecht
